DOGTOWN "Cross Logo" Skateboard 1/4" Riser Pads BLUE Pair Longboard Old Skool Risers
-34074-p.jpg?v=1aae821f-7c4c-46f2-8641-33d8d5424626){kind=logo}
description - Customer Reviews
Dogtown
"Cross Logo"
"Cross Logo"
Riser Pads
1/4 inch flat (6.5mm)
1/4 inch flat (6.5mm)
Stiff Plastic Construction
Pair
Fit New & Old Truck Hole Pattern (6 hole not slots)
BLUE
inc. Dogtown "Cross" Sticker.
Pair
Fit New & Old Truck Hole Pattern (6 hole not slots)
BLUE
inc. Dogtown "Cross" Sticker.
New 1/4" (aprox.6.5mm) high riser pads for extra wheel clearance in stiff plastic - much lighter than solid softer risers.
If you want to keep the weight down but need to run risers then these are the lightest ones we sell. ;-)
NOTE : These no longer have "slots". They all now come with the standard 6 Hole pattern for new and old baseplate trucks.
For all 70s, 80s and 90s original/retro boards, slalom, downhill, longboards, cruiser boards and pool boards and even some mountain boards.
If you're running bigger wheels then you probably need some extra wheel clearance...these are the cure for your wheel bite worries.
They will fit all old hole and new hole pattern trucks.
Price is for one pair (two risers).
Note : Generally you'll need 1 1/4" long truck bolts with 1/4" risers.
Price is for one pair (two risers).
Note : Generally you'll need 1 1/4" long truck bolts with 1/4" risers.
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
