INDEPENDENT 109 Stage 11 "T Hanger" Skateboard Trucks 6.9 inch Slalom Old Skool
description - Customer Reviews
Independent
109 Trucks
Stage 11
Standard Height (not Low!)
Polished
Slalom/Cruiser/Old Skool
109 Trucks
Stage 11
Standard Height (not Low!)
Polished
Slalom/Cruiser/Old Skool
Note : They no longer come with the "+" (cross) logo on the baseplates
Pair
Pair
Pair of new Independent Stage 11 skateboard trucks, you all know these, they turn well and are strong, what more do you need?
Probably the best trucks ever made and these are the skinny 109mm hanger size.
This size first came out in 1978 and has been available for years but recently supplies all dried up & 109s were getting very rare, so it's good to see them back again.
They are favourites with slalom riders but are superb for any smallish street cruiser board. They will also look and perform right on many 70s re-issued decks... Alva 77 & 79, Tunnel, Dogtown Reddog & Tailtap, G&S Fibreflex, etc.
Probably the best trucks ever made and these are the skinny 109mm hanger size.
This size first came out in 1978 and has been available for years but recently supplies all dried up & 109s were getting very rare, so it's good to see them back again.
They are favourites with slalom riders but are superb for any smallish street cruiser board. They will also look and perform right on many 70s re-issued decks... Alva 77 & 79, Tunnel, Dogtown Reddog & Tailtap, G&S Fibreflex, etc.
The hanger is the same shape as the very 1st Indies the so called "T hanger" which is instantly recognisable as a 1970s Indy.
Want your old skool deck to look right? Then set it up with these and reissued OJ Super Juice or Tunnel Rocks.
The baseplates have all 6 holes so they'll also fit onto original 70s decks without any deck drilling needing to be carried out.
They have a 109mm wide hanger (approx 4.25") and an axle width of 6.9" making them perfect for boards in the 6.5" to 7.5" width range.*
* Note: all measurements are approximate- may be a mm or two either way!
The baseplates have all 6 holes so they'll also fit onto original 70s decks without any deck drilling needing to be carried out.
They have a 109mm wide hanger (approx 4.25") and an axle width of 6.9" making them perfect for boards in the 6.5" to 7.5" width range.*
* Note: all measurements are approximate- may be a mm or two either way!
Specs
- 6 Hole baseplate
- 4.25" hanger (109mm)
- 6.9" axle (175mm)
- 59mm tall (to axle centre)
- High quality urethane bushings
- Aircraft grade aluminium castings
- 315g weight
- 1978 design
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
