KRUX "Risers" Skateboard Riser Pads Hard 1/4" pair WHITE Quarter Inch
-30501-1-p.jpg?v=A4E5F178-ED41-448B-B315-4A74A0426703)
description - Customer Reviews
KRUX
"Risers"
"Risers"
Riser Pads
Semi-Hard
1/4" High
Pair
Semi-Hard
1/4" High
Pair
WHITE
Pair of new Krux 1/4 inch high riser pads for all types of skateboards...new skool, old skool, longboards, cruisers & slalom boards.
They are shaped to perfectly fit the shape of Krux baseplates but you can use them under most trucks.
They are drilled for new hole trucks only so are not suitable for original 70s/80s decks and some re-isses.
Use these to increase wheel clearance if you're using loose trucks or larger wheels.
You can also stack these up to get your desired ride height.
You may need to get longer truck bolts when adding risers to your ride.
Generally:
1.25" bolts for 1/4" risers
1" or 1.25" bolts for 1/8" risers (1" only just fit)
Note : if your truck bases are thicker than average (Indy standard) then go for 1.25" bolts with 1/8" risers
They are drilled for new hole trucks only so are not suitable for original 70s/80s decks and some re-isses.
Use these to increase wheel clearance if you're using loose trucks or larger wheels.
You can also stack these up to get your desired ride height.
You may need to get longer truck bolts when adding risers to your ride.
Generally:
1.25" bolts for 1/4" risers
1" or 1.25" bolts for 1/8" risers (1" only just fit)
Note : if your truck bases are thicker than average (Indy standard) then go for 1.25" bolts with 1/8" risers
Write an online review and share your thoughts with other shoppers!
Be the first to review this product
