SANTA CRUZ Erick Winkowski "Dope Planet" Complete Skateboard 10.3" Slimeballs Old Skool
description - Customer Reviews
Santa Cruz
Erick Winkowski Pro Model
Old Skool Pool/Park/Vert Deck
10.34" x 30.54"
15.0" Wheel base
Complete with:
Sushi "California" Trucks
plus
Santa Cruz "Slimeball" 60mm 97a wheels
Complete Custom Built Board
FREE POSTAGE (mainland UK)
Erick Winkowski Preissue Deck from Santa Cruz.
At last these are back in stock and we've not been short shipped by the distributors this time!
This shape Winkowski is the best selling old skool shaped deck made today.! It out sells all of the reissues and for us all decks we stock so grab one before they are all gone again!
This one is custom design by Winkowski.
You can set it up as a radical park ripper or put soft wheels and make it a super fun cruiser/transport board.
The concave is medium deep with a double kick profile and a shorter, lower nose which is still big enough to be useable. There is also a front "rocker" and a double "flip" on the last couple of inches of the tail kick - Cruz Missile II Concave. A concave that Santa Cruz developed in the late 80s and use on many of their reissues and now on this deck too.
We've added this in the "80s reissue" category. It's not a reissue but it is an old skool shape on an original 1980s concave - good enough for us. ;-)
This one has been built up by ourselves at Conflict to be a really great late 1980s board using parts that work & keep that late 80s look - nothing that isn't period correct looking or performing.
It is set up with Sushi "California" trucks. These great looking, strong trucks are based on the Indy design so they turn well but are way cheaper! The width is between Indy 159s & 169s so perfect on this deck.
...or choose to upgrade, at checkout, to genuine Independent Stage 11 169s, the best of the best.
These reissues are made by the original manufacturer, Santa Cruz/NHS. They are the original shape, original size and most importantly have the right look on this deck.
All in all a superb set-up just as you'd have rode in the very late 1980s.
NOTE : Shown pictured in parts but will be sent fully built unless you request left unbuilt.
7 Ply
10.34" x 30.54"
4.75" nose
6.59" tail
15.0" WB (measured from inner to inner holes)
Concave : medium/Deep (Cruz Missile II)
Profile : Double Kick, lower nose, front rocker, double tail flip.
New hole pattern truck drillings
Width over front truck : 9.125
Width over rear truck : 8.25"
Wheels
Santa Cruz "Slimeball - Vomits"
43mm wide
28mm running surface
Center-set profile
hardness 97a
Original shape, size and manufacturer!
ABEC 5 Bearings plus Spacers
Trucks
Sushi 8.875"
162mm hanger width
Polished finish
225mm axle (approx 8.875")
quality urethane bushings
1.25" Countersunk Bolts
1/4" Risers
Be the first to review this product












-37511-p.jpg?w=70&h=9999&v=53AA151D-8BD5-4B81-91F5-5063E5E83611)
-37511-p.jpg?w=70&h=9999&v=CF579D17-0A95-41DB-AE88-66C57A983401)
-37511-p.jpg?w=70&h=9999&v=9C1A4F6C-C030-4111-BCCD-07DCC87DA7A7)
-37511-p.jpg?w=70&h=9999&v=405DACB7-5DA5-4E49-9C05-78405128493F)



