SLAPPY "ST1 Hollow" Skateboard Trucks 8.75" POLISHED SILVER Pair Pool 156mm

POLISHED SILVER Finish
Priced per Pair

Slappy Trucks bring you the ST1 hollow trucks.

 Slappy's ST1 Hollow trucks have a polished finish with classic looks and hollow axles and kingpins for a lighter weight.

These ones with their 8.75 inch (156mm hanger) width and 53.9mm height makes them perfect for  pool shaped decks,1980s reissues and also any huge 8.75-9" plus popsicle decks.  They'll also be perfect on "egg" shaped decks of around 9.25 to 9.5".

Erick Winkowski rides 8.75" width trucks on his popular Santa Cruz old skool shape.  That board is 10.3 inch wide! 

You do not stick 10 inch trucks on a 10" wide "shape" deck!!!  8.75 to 9.0" is usually sufficient. 

Slappy Trucks turn similarly to Ace trucks but have the stability of Indy Stage 11s.  They have superb grind clearance and suffer less wheelbite than many other big names.

If you are in the market for some new metal then these need your consideration.

About Slappy Trucks:

Throughout the entire pandemic, when the world stopped and things were locked down, I started messing with my trucks. I decided to start working designs, and the sampling process began shortly after.  I went through so many different versions of the hangers and baseplates, experimenting with different bushings, bushing heights, hardnesses, turning radius, kingpins, polishes, and the list goes on for over two years. Finally, I got the truck to where I really like it. The main thing I wanted in a truck was to have the best grind clearance I could get without messing up the turn I wanted. I also wanted the truck to be strong, light, and have a classic look and feel. At the end of all this, it's just me trying to create something new with Slappy Trucks.

-- Mike Sinclair

Price is for 2 trucks

8.75" axle (222mm) * (note: the images may shows other width versions)
6.25" hanger (156mm) *
Height : 53.9mm
Hollow Kingpins & Axles
New hole base plate pattern
Weight : 375g

For Decks 8.75" to 9.5"+

* Note: all measurements are approximate- may be a mm or two either way.