TRACKER "Racetrack X" Skateboard Truck 139mm 8.0" SILVER Slalom Carve Single Truck

"Racetrack - 139"

RTX  - one truck (Single)

139mm Hanger

Made in USA

One new Tracker "Racetrack X" slalom / giant slalom truck.

One RTX (front) or buy a pair to use front and back.

These are designed as carving/slalom front trucks.  

They are not really designed for grinding as the kingpins are slightly longer (deeper bushings) to allow for extra steer.  Trim the kingpin and stick in lower top bushings though and you'll be able to hit the coping too.

Plus they come with 6 hole baseplates so will fit reissued 70s and 80s decks.

One of the best trucks out there if you want carvy transport trucks to stick on an 80s reissue.

Tracker on the "Racetrack":

The Tracker Racetrack X is quick and loose, with a high roll center and a straight point pivot for a more "tippy" turn.  We designed the Racetrack X to be used as a front steering truck, one that gets the rider into and out of a turn quickly and predictably.

Each Racetrack X is hand assembled using Tracker's exclusive hourglass bottom cushion, taller top cushion and a slightly longer kingpin for fine tuning and adjustments.

Brilliant, classic trucks (Trackers were the fore fathers of all modern trucks).

Price is for a PAIR of trucks.

• 139mm hanger width (approx 5.5")
• 204mm axle (approx. 8.0")
• quality urethane bushings
• Aircraft grade alloy castings
• Raw Silver Finish
• 6 hole base plate pattern